Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200Call us on: +44 (0)208 378 3200

Post & Rail F1 Socket & SupaSocket

Furnitubes F1 Socket

Furnitubes F1 socket provides a neat solution for locations where occasional access is required. Available in three sizes to accept a 50mm square post, or 75 and 115mm diameter posts. They are of robust composite steel construction with one hole to accept the railings post and another to access the internal retention bolts.

The Supasocket is a low-cost moulded plastic socket which allows easy removal of guardrails for special occasions or when they need replacing. A damaged post can be swiftly and easily removed and replaced by one person, with a special removal tool – a process that literally only takes a few minutes!

F1 50 Socket - F1 50

F1 50 Socket

F1 50
Composite removable socket with steel lid
To accept 50 mm square OKR railing post

F1 50 Socket Operation - F1 50 - Part 1

F1 50 Socket Operation - F1 50 - Part 2

F1 50 Socket Operation - F1 50 - Part 3

F1 50 Socket Operation - F1 50 - Part 4

F1 50 Socket Operation

F1 50

1) Set socket in concrete. Align along the direction of the railings.

2) Fix pressure plate loosely in place. Withdraw bolt to allow the post to enter.

3) Slide post into socket. Tighten bolt fully to secure post.

4) Replace lid and bolt securely.

SupaSocket - GS 50

SupaSocket

GS 50
Composite Plastic Socket with Lid
To accept ø50 mm square posts

Options:
Plastic refit kit, removal tool and extraction tongs

Back to top