General Notes
Finish
Available in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards
Removable bollards are supplied with a socket & hinged cover plate. The bollard has a fixed spigot that passes through the hinged cover plate allowing an FB14 padlock to secure the bollard in the socket. Padlocks are not supplied.
Base Plated Bollards
Where in-ground fixing is difficult a base plate option is available.
Product Codes
Product Codes are in bold type. Dimensions are in mm, are approximate and do not form any part of the contract.We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
| Harrow Bollard Range - Single Ring | ||
|---|---|---|
HAR 211 Options: |
HAR 212 Options: |
HAR 213 Options: |
| Harrow Bollard Range - Single Ring | |
|---|---|
HAR 213 SC |
HAR 214 Options: |
| Harrow Bollard Range - Double Ring | ||
|---|---|---|
| HAR 221 Options: |
HAR 222 Options: |
HAR 223 Options: |
| Harrow Bollard Range - Double Ring | |
|---|---|
| HAR 223 SC |
HAR 224 Options: |
| Kenton Bollard Range - Single Neck | ||
|---|---|---|
| KEN 111 Options: |
KEN 112 Options: |
KEN 113 Options: |
| Kenton Bollard Range - Single Neck | |
|---|---|
KEN 113 SC |
KEN 114 Options: |
| Kenton Bollard Range - Double Neck | ||
|---|---|---|
| KEN 121 Options: |
KEN 122 Options: |
KEN 123 Options: |
| Kenton Bollard Range - Double Neck | |
|---|---|
| KEN 123 SC |
KEN 124 Options: |
| Alperton Bollard Range - Single Neck | ||
|---|---|---|
| ALP 311 Options: |
ALP 312 Options: |
ALP 313 Options: |
| Alperton Bollard Range - Double Neck | ||
|---|---|---|
ALP 321 Options: |
ALP 322 Options: |
ALP 323 Options: |
| Sudbury Bollard Range - Single Ring | ||
|---|---|---|
SUD 411 Options: |
SUD 412 Options: |
SUD 413 Options: |
| Sudbury Bollard Range - Double Ring | ||
|---|---|---|
SUD 421 Options: |
SUD 422 Options: |
SUD 423 Options: |
| Edgware MK2 Bollard | Centurian Security Bollard | Guardian Security Bollard |
|---|---|---|
EDG 901 Options: |
CEN 800 SC |
GUA 900 SC |
| Salisbury MK 2 Bollard | Salisbury Major MK2 Bollard | Holborn MK2 Bollard |
|---|---|---|
SAL 530 Options: |
SAL 540 Options: |
HOL 510 Options: |
| Holborn Major MK2 Bollard | Removable Socket |
|---|---|
| HOL 520 Options: |
SOCK SS SOCK LS |
| Small F1 Socket | Large F1 Socket |
|---|---|
| F1 75 Composite Removable Socket, Cast Iron Lid & Cast Alum Key. To accept bollards of Ø 75mm diameter. |
F1 115 Composite Removable Socket, Cast Iron Lid. To accept bollards of Ø 115mm diameter. |
Finish Options
Available in a primed or galvanised finish. We recommend that top coats are applied on site after installation.
Removable Bollards
Removable bollards are supplied with a socket & hinged cover plate. The bollard has a fixed spigot that passes through the hinged cover plate allowing an FB14 padlock to secure the bollard in the socket. Padlocks are not supplied.
Base Plated Bollards
Where in-ground fixing is difficult a base plate option is available. The steel base has 4 fixing holes.
Finish
Galvanised finish only.
Security Bollards
The Anti-Ram Raid versions are used in situations where added impact resistance is required. Ask about the suitability of reinforcing other bollards.
F1 Socket
F1 Sockets are available as an alternative to our standard socket and are designed to accept bollards of either Ø75 or Ø115.
Disability Conscious
Bollards installed 1000 mm above ground aid the visually impaired and can assist with the requirements of BS8300.
© Copyright 2008 Furnitubes International Ltd