Enhanced Polyester Powder Coat

Enhanced Powder coating uses the same process as above to apply the polyester powder. The main difference is the specialist pre-treatment process before application which improves adhesion of the paint for optimum long-term corrosion protection. The pre-treatment process consists of the use of phosphates, and an additional zinc prime before the powder application. Most RAL & BS colours as standard.

LIFE INDICATOR 2 - 4 years

Colour Range
Furnitubes EPPC is available in the full range of RAL and BS4800 colours. The European RAL and British BS systems are a convenient way of specifying exterior paints. Swatches are available from most paint suppliers and they enable specifiers to ensure that the colours are consistent within a scheme.

Maintenance
Check coatings twice a year and wipe away any dirt with a damp cloth and light detergent. 'Harsh' cleansers may be used, although not on a regular basis as they may effect gloss level. Repaint damaged or worn areas and consider a complete regular maintenance re-paint every 2-3 years as below.

On-site Damage Repair
Should any painted product have their finish damaged, it can be repaired using the following method:

1. Flatten paint surface with a fine Scotch-Brite Pad.
2. Leave to stand for 24hours to allow excess solvents to evaporate.
3. Overcoat with Cromadex 233 Brush and Roller Decorative Finish Recommend 2 coats.