Brighton Bollard
Furnitubes’ Brighton bollard was first designed for Brighton Borough Council. Furnitubes began the task of designing and manufacturing a bollard which would mirror the profile of the Brighton Pavilion roof and compliment the traditional surroundings. The Brighton is available as a removable bollard in cast aluminium. The Brighton removable bollard can be housed in either a hinged steel socket (to be secured with a padlock) or the F1 socket, which provides a flat, flush finish when not in use.
PRODUCT CODES & OUTLINE SPECIFICATIONS:
Product Code |
Description |
Above Ground mm |
Below Ground mm |
Diameter mm |
|
BRN 707 AR | 25kg |
Aluminium removable |
850 | 320 | 195sq |
MATERIALS & FINISHES:
- Cast aluminium - primed finish
We recommend that top coats are applied on site after installation
OPTIONS:
INSTALLATION:
Removable
- Foundation depth 320mm
- Minimum recommended foundation 450mm sq
- Dig an additional drainage hole 80mm (d) x 150mm (sq) and fill with pea shingle (directly below socket)
- Concrete mix to 25 newtons
Product Notes
Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
Refer to e-brochure or PDF for full specification details and options.
Downloads
Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD
Telephone: +44 (0)20 8378 3200
Email: sales@furnitubes.com
© Copyright Furnitubes International Ltd, 2010-2016