Enquire NOW
facebooktwitterlinkedinyoutubepinterest
Furnitubes

Bury Telescopic Bollard

The Bury telescopic bollard is supplied in polyurethane elastomer with a gloss finish. The Bury telescopic bollard meets the requirements of a wide variety of security needs, from preventing access to driveways to stopping ram raid attacks. The bollard is designed with ease of use in mind. It takes mere seconds to raise each one and lock it into place using its integral high security lock. When not in use the post is completely concealed, sliding discretely into the ground where it is covered by a steel flap.

 

PRODUCT CODES & OUTLINE SPECIFICATIONS:

 

Product Code
 

 Description
Above
Ground
mm
Below
Ground
mm

 

Diameter
mm

 
 TPB 725 18kg  Polyurethane (PU)
 
850 1140 Ø115mm

MATERIALS & FINISHES:

  • Polyurethane elastomer post - painted finish
  • Steel telescopic socket - galvanised finish

OPTIONS:

  • Fixed bollard

INSTALLATION:

  • Foundation depth is the same as root of bollard plus 110mm
  • Minimum recommended foundation is Ø350mm
  • Fill hole with just over 100mm of 20mm/12mm clean chippings
  • Lower post onto chippings and check height
  • Lid of post should be 5mm above ground level
  • Position post central in bore hole and add more chippings until post stands unaided
  • Withdraw sliding post and manoeuvre into vertical position using a spirit level
  • Add more chippings – see specific instructions for amount
  • Fill remainder of hole with 4:2:1 concrete mix and smooth off neatly to lid surround, leaving slight fall away
  • Finally check again vertical position using a spirit level and retract post back gently into ground & lock - LEAVE FOR 24 HOURS
  • Keep fixed upper post clean during fitting procedure

Product Notes

Usage
When lowering the post do so in a controlled manner. Do not allow the post to free fall down into base.

Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

Back to Products List

  • TPB 725 Bury PU telescopic bollard

    TPB 725 Bury PU telescopic bollard

  • TPB 725 Bury PU telescopic bollard top detail

    TPB 725 Bury PU telescopic bollard top detail

1 of 2

Refer to e-brochure or PDF for full specification details and options.


Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD

Telephone: +44 (0)20 8378 3200

Email: sales@furnitubes.com

© Copyright Furnitubes International Ltd, 2010-2016



Your privacy and our use of cookies

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website. Click here for more information.

[x]