Capital Bollard
The Capital bollard balances strength and protection with modern aesthetics. It is tapered, and features a recess which can be painted in a contrasting colour or covered with reflective tape. It is available with a 270mm or 150mm diameter cast-in plinth to accommodate D.f.T signs to alert cyclists, pedestrians and motorists of a specific highway instruction. The Capital is available as a removable bollard in cast aluminium. The Capital removable bollard can be housed in either a hinged steel socket (to be secured with a padlock) or the F1 socket, which provides a flat, flush finish when not in use.
PRODUCT CODES & OUTLINE SPECIFICATIONS:
|
Product Code |
Description |
Above Ground mm |
Below Ground mm |
Diameter mm |
|
| CAP 100 | 35kg |
Cast iron |
1000 | 350 | Ø150 |
| CAP 100 T | 36kg |
Timber |
1000 | 350 | Ø150 |
MATERIALS & FINISHES:
- Cast iron - primed finish
- Opepe hardwood timber - Sadolin Woodstain finish, colour 'Mais'
We recommend that top coats are applied on site after installation
OPTIONS:
- Removable - standard or F1 socket
- 100mm reflective tape within recess - refer to accessories for colour
- 100mm circular vinyl sign within recess
- Additional cast plinth with either 150mm or 270mm circular vinyl sign
INSTALLATION:
Root fixed
- Foundation depth is usually the same as the root depth of the bollard
- Minimum recommended foundation diameter is the root diameter plus 200mm
- Concrete mix to 25 newtons
Removable
- Foundation depth 320mm
- Minimum recommended foundation 450mm sq
- Dig an additional drainage hole 80mm (d) x 150mm (sq) and fill with pea shingle (directly below socket)
- Concrete mix to 25 newtons
View colour options for this product
Product Notes
When ordering the Capital bollard with a plinth, please note that with some signs 270mm is the minimum diameter stated by the D.f.T. A 'departure from standard authorisation' would be required before use of the Capital bollard with a 150mm diameter plinth, depending on the sign chosen. Please seek professional advice before purchasing.
Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
-
CAP100 Capital cast iron bollard
-
CAP100T Capital opepe hardwood timber bollards with white reflective tape
-
CAP100 AR - Capital removable bollards
-
CAP100 Capital cast iron bollards with vinyl cycle parking sign
-
CAP100 Capital cast iron bollard with cycle plinth - please see notes regarding use of signs
-
CAP100 Capital cast iron bollard with cycle plinth - please see notes regarding use of signs
Refer to e-brochure or PDF for full specification details and options.
Downloads
Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD
Telephone: +44 (0)20 8378 3200
Email: sales@furnitubes.com
© Copyright Furnitubes International Ltd, 2010-2016
