Enquire NOW
facebooktwitterlinkedinyoutubegoogle-pluspinterest
Furnitubes

F1 Sockets Series For Removable Bollards

Furnitubes F1 sockets is the ideal solution for bollards to be removable. The sockets can be constructed in heavy duty cast iron, steel and hard wearing plastics, with one hole to accept the bollards post and another to access the internal retention bolts. Two lids are also supplied per socket, one to hide these bolts and the other to cover the main hole when not in use. The F1 sockets are designed and tested to withstand vehicular over run of up to 12.5 tonnes point loading when not in use. There are four socket sizes available: F1 60,  F1 75,  F1 102 and F1 115.

PRODUCT CODES & OUTLINE SPECIFICATIONS:

  • F1 60
    to accept Ø60mm post x 335mm (b/g) x 230mm (l) x 140mm (w); weight 11.5kg
  • F1 75
    to accept Ø75mm post x 300mm (b/g) x 230mm (l) x 140mm (w); weight 11.5kg
  • F1 102
    to accept Ø102mm post x 300mm (b/g) x 230mm (l) x 140mm (w); weight 11.5kg
  • F1 115
    to accept Ø115mm post x 300mm (b/g) x 270mm (l) x 175mm (w); weight 21.5kg

The dimensions of the socket depends on the bollard type and size at ground level - please contact the sales team for details. 

MATERIALS & FINISHES:

  • Steel - galvanised finish

OPTIONS:

  • Coated top

INSTALLATION:

  • Prepare the foundation depth at least 75mm deeper than the overall height of the socket and fill below with hard-core or gravel to allow for drainage.
  • Place the socket in the centre of the hole, ensuring there is good clearance on all sides, and hold in vertical position.
  • Concrete mix to 25 newtons, pour and then compact well and check that socket is vertical until set.
    NOTE: If existing ground is loose or uncompacted, a wider/deeper base of concrete should be used.

Product Notes

Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

Back to Products List

  • Cast iron removable bollard in F1 socket

    Cast iron removable bollard in F1 socket

  • Stainless steel removable bollard in F1 socket

    Stainless steel removable bollard in F1 socket

1 of 2

Refer to e-brochure or PDF for technical information.


Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD

Telephone: +44 (0)20 8378 3200

Email: sales@furnitubes.com

© Copyright Furnitubes International Ltd, 2010-2016



Your privacy and our use of cookies

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website. Click here for more information.

[x]