Enquire NOW

Holborn Gate

The Holborn bollard can be readily strengthened and adapted to be used as hinge and locking posts for fitting of a gate. Gates can be made to any specific size required, but 3 standard widths are offered to suit most applications - with clearanace dimensions of 2900mm, 3420mm or 4500mm. ‘Emergency Access - Keep Clear’ reflective sign plates can be fitted to the gates to alert drivers to the closed section of road or private property entrance. Other steel bollards, such as the Harrow or Kenton ranges, or composite bollards, such as the Salisbury can also be adapted for gates in the same way as the Holborn.

  Clearance Dim
Above Ground
Below Ground

 HOL 290     
2900 900 800
 HOL 340
3420 900 800
 HOL 450
4500 900 800


  • Cast iron - primed finish
  • Steel - galvanised finish
  • We recommend that top coats are applied on site after installation


  • Locking post
  • Emergency Access Keep Clear reflective sign


Root fixed

  • Foundation depth is usually the same as the root depth of the post
  • Minimum recommended foundation diameter is the root diameter plus 200mm
  • Concrete mix to 25 newtons

Product Notes

Before making your final guardrail or post & rail selection please view our Selecting an Appropriate Rail System page.

Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

Back to Products List

  • Gate mounted on adapted Holborn bollards

    Gate mounted on adapted Holborn bollards

1 of 1

Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD

Telephone: +44 (0)20 8378 3200

Email: sales@furnitubes.com

© Copyright Furnitubes International Ltd, 2010-2016

Your privacy and our use of cookies

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website. Click here for more information.