Kenton Bollard
The Kenton steel bollard has a circular profile and features a domed top to prevent rainwater accumulating. The Kenton can be supplied with either a single or double inset neck detail, which is ideal for the addition of reflective tape. Kenton bollards are available in heights of either 900mm or 1000mm as standard. The latter 1000mm is the minimum recommended height for distinction by the visually impaired and assist with the requirements of the DDA and BS 8300. The bollards can also be supplied base plated or removable, and are used extensively at retail parks, in particular.
PRODUCT CODES & OUTLINE SPECIFICATIONS:
|
Product Code |
Description |
Above Ground mm |
Below Ground mm |
Diameter mm |
|
| KEN 111 | 13kg |
Single neck |
900 | 350 | Ø115 |
| KEN 112 | 23kg |
Single neck |
900 | 350 | Ø140 |
| KEN 113 | 27kg |
Single neck |
900 | 350 | Ø170 |
| KEN 114 | 35kg |
Single neck |
900 | 350 | Ø195 |
| KEN 121 | 14kg |
Double neck |
900 | 350 | Ø115 |
| KEN 122 | 24kg |
Double neck |
900 | 350 | Ø140 |
| KEN 123 | 28kg |
Double neck |
900 | 350 | Ø170 |
| KEN 124 | 37kg |
Double neck |
900 | 350 | Ø195 |
† Weights based on standards specification: “mild steel galvanised” different material weights may vary.
MATERIALS & FINISHES:
- Stainless steel - G304 bright or satin polished
- Stainless steel - G316 bright or satin polished
- Steel - galvanised finish
- Steel - polyester powder coated finish
OPTIONS:
- 1000mm above ground (steel bollards)
- Base plated
- Removable - standard or F1 socket
- Security version
- Reflective tape - refer to accessories for colour
INSTALLATION:
Root fixed
- Foundation depth is usually the same as the root depth of the bollard
- Minimum recommended foundation is the root diameter plus 200mm
- Concrete mix to 25 newtons
Base plated
- Base plates have 4no fixing holes to take M16 bolts (maximum). Fixings not supplied.
Removable
- Foundation depth 320mm
- Minimum recommended foundation 450mm sq
- Dig an additional drainage hole 80mm (d) x 150mm (sq) and fill with pea shingle (directly below socket)
- Concrete mix to 25 newtons
Security
- Please note that this product will not perform as an anti ram raid bollard until concrete is fully set and must be protected until this time
View colour options for this product
Product Notes
Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.
-
KEN111 Kenton single neck gavanised steel bollards
-
KEN113 PPC Kenton single neck powder coated steel bollards
-
KEN111 SS Kenton Stainless Steel Bollards
-
KEN111 Kenton single neck galvanised steel bollards
-
KEN122 R Kenton double neck powder coated removable steel bollards
-
KEN123 SC Kenton double neck steel security bollards
-
Kenton Single Neck galvanised steel bollards
-
KEN122 Kenton double neck powder coated steel bollard
-
KEN112 R Kenton Single Neck galvanised steel removable bollards
Refer to e-brochure or PDF for full specification details and options.
Downloads
Kenton Service Bollard
Harrow BollardAddress: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD
Telephone: +44 (0)20 8378 3200
Email: sales@furnitubes.com
© Copyright Furnitubes International Ltd, 2010-2016
