Enquire NOW

Standard Sockets For Removable Bollards

A standard socket is a simple economic solution using galvanised mild steel socket for when it is necessary for bollards to be removable. The bollard is fitted with a hasp to pass through slot in socket hinge plate for locking with an FB14 padlock or similar. Ease of operation is convenient for situations where bollard needs to be removed quickly such as emergency access routes. Hinged cover plate sits flush to ground level when closed but it is not designed to be driven over - therefore it is most suited to short term removal situations. Sockets are not supplied with padlocks and keys. 


    large socket for over > 165mm diameter / square bollards

    small socket for under < 166mm diameter / square bollards

The dimensions of the socket hinge plate depends on the bollard type, size and shape at ground level - please contact the sales team for details. 


  • Steel - galvanised finish


  • Coated top
  • FB14 padlock and key 


  • Prepare the foundation depth at least 75mm deeper than the overall height of the socket and fill below with hard-core or gravel to allow for drainage.
  • Place the socket in the centre of the hole, ensuring there is good clearance on all sides, and hold in vertical position.
  • Concrete mix to 25 newtons, pour and then compact well and check that socket is vertical until set.
    NOTE: If existing ground is loose or uncompacted, a wider/deeper base of concrete should be used.

Product Notes

Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

Back to Products List

  • Cast iron removable bollard in standard socket with padlock

    Cast iron removable bollard in standard socket with padlock

  • Stainless steel removable bollard in standard socket with padlock

    Stainless steel removable bollard in standard socket with padlock

1 of 2

Refer to e-brochure or PDF for technical information.

Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD

Telephone: +44 (0)20 8378 3200

Email: sales@furnitubes.com

© Copyright Furnitubes International Ltd, 2010-2016

Your privacy and our use of cookies

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website. Click here for more information.