Enquire NOW
facebooktwitterlinkedinyoutubegoogle-pluspinterest
Furnitubes

Zenith® Bollard

The Zenith bollard is a stainless steel bollard with a bright or satin polished finish. The popular Zenith circular bollard is simple in design, low in maintenance, hard wearing and 100% recyclable. Zenith bollards are available in heights of either 900 or 1000mm. The latter can help the visually impaired and assist with the requirements of the DDA and BS 8300. Base plated, removable and security versions are available. The Zenith removable bollard can be housed in either a hinged steel socket (to be secured with a padlock) or the F1 socket, which provides a flat, flush finish when not in use. The Zenith bollard is also available in steel with a galvanised or powder coated finish.

PRODUCT CODES & OUTLINE SPECIFICATIONS:

Above Ground  900mm 1000mm
Below Ground  300mm
 
300mm
 Ø60mm ZEN 706
(weight: 3.5kg)
 
ZEN 806
(weight: 4kg)
 Ø76mm
 
ZEN 737
(weight: 4.5kg)
 
ZEN 837
(weight: 5kg)
 Ø89mm
 
ZEN 708
(weight:5.5kg)
 
ZEN 808
(weight: 6kg)
 Ø102mm ZEN 700
(weight: 6kg)
 
ZEN 800
(weight: 6.5kg)
 Ø115mm ZEN 701
(weight: 7kg)
 
ZEN 801
(weight: 7.5kg)
 Ø140mm
 
ZEN 703
(weight: 8.5kg)
 
ZEN 803
(weight: 9kg)
 Ø153mm *
 
ZEN 705
(weight: 9.5kg)
 
ZEN 805
(weight: 10kg)
 Ø170mm ZEN 702
(weight: 10.5kg)
 
ZEN 802
(weight: 11kg)
 Ø204mm * ZEN 704
(weight: 12.5kg)
 
ZEN 804
(weight: 13.5kg)

† Weights based on standards specification: “G304 stainless steel satin polished” different material weights may vary.

MATERIALS & FINISHES:

  • Steel - galvanised finish
  • Steel - polyester powder coated finish
  • Stainless steel - G304 bright or satin polished
  • Stainless steel - G316 bright or satin polished

OPTIONS:

INSTALLATION:
Root fixed

  • Foundation depth is usually the same as the root depth of the bollard
  • Minimum recommended foundation is the root diameter plus 200mm
  • Concrete mix to 25 newtons

Base plate

  • Base plates have 4no fixing holes to take M16 bolts (maximum). Fixings not supplied.

Removable

  • Foundation depth 320mm
  • Minimum recommended foundation 450mm sq
  • Dig an additional drainage hole 80mm (d) x 150mm (sq) and fill with pea shingle (directly below socket)
  • Concrete mix to 25 newtons

Security

  • Please note that this product will not perform as an anti ram raid bollard until concrete is fully set and must be protected until this time

Product Notes

Ø153mm and Ø204mm bollards are available in stainless steel only (not mild steel)

Zenith® Range
Zenith® Bollard - Registered Furnitubes International Ltd Design.

Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

 

Back to Products List

  • ZEN701 Zenith satin polished stainless steel bollards

    ZEN701 Zenith satin polished stainless steel bollards

  • ZEN702R Zenith satin polished removable bollard

    ZEN702R Zenith satin polished removable bollard

  • ZEN703 and ZEN703R Zenith stainless steel bollards

    ZEN703 and ZEN703R Zenith stainless steel bollards

  • ZEN702R Zenith bright polished stainless steel bollards

    ZEN702R Zenith bright polished stainless steel bollards

  • ZEN701BP Zenith bright polished stainless steel bollards

    ZEN701BP Zenith bright polished stainless steel bollards

  • ZEN701 PPC Zenith powder cotated steel bollard with parking sign (special commission)

    ZEN701 PPC Zenith powder cotated steel bollard with parking sign (special commission)

  • ZEN701R Zenith galvanised steel removable bollards

    ZEN701R Zenith galvanised steel removable bollards

  • ZEN701SC Zenith Security satin polished stainless steel bollards

    ZEN701SC Zenith Security satin polished stainless steel bollards

  • ZEN701 PPC Zenith powder coated steel bollards

    ZEN701 PPC Zenith powder coated steel bollards

  • ZEN702 Zenith satin polished stainless steel bollards

    ZEN702 Zenith satin polished stainless steel bollards

  • ZEN701R Zenith satin polished removable stainless steel bollards in F1 socket

    ZEN701R Zenith satin polished removable stainless steel bollards in F1 socket

1 of 11

Refer to e-brochure or PDF for full specification details and options.


Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD

Telephone: +44 (0)20 8378 3200

Email: sales@furnitubes.com

© Copyright Furnitubes International Ltd, 2010-2016



Your privacy and our use of cookies

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website. Click here for more information.

[x]