Enquire NOW
facebooktwitterlinkedinyoutubegoogle-pluspinterest
Furnitubes

Zenith® Sloped Bollard

The Zenith sloped bollard is a stainless steel bollard with a bright or satin polished finish. The popular Zenith bollard is simple in design, low in maintenance, hard wearing and 100% recyclable. Zenith sloped bollards are available in heights of either 900 or 1000mm. The latter can help the visually impaired and assist with the requirements of the DDA and BS 8300. Base plated, removable and security versions are available. The Zenith sloped removable bollard can be housed in either a hinged steel socket (to be secured with a padlock) or the F1 socket, which provides a flat, flush finish when not in use. The Zenith sloped bollard is also available in steel with a galvanised or powder coated finish.

PRODUCT CODES & OUTLINE SPECIFICATIONS:

Above Ground  900mm 1000mm
Below Ground  300mm
 
300mm
 Ø60mm ZEN 456
(weight: 3.5kg)
 
ZEN 856
(weight: 4kg)
 Ø76mm
 
ZEN 457
(weight: 4.5kg)
 
ZEN 857
(weight: 5kg)
 Ø89mm
 
ZEN 458
(weight: 5.5kg)
 
ZEN 858
(weight: 6kg)
 Ø102mm ZEN 450
(weight: 6kg)
 
ZEN 850
(weight: 6.5kg)
 Ø115mm ZEN 451
(weight: 7kg)
 
ZEN 851
(weight: 7.5kg)
 Ø140mm
 
ZEN 453
(weight: 8.5kg)
 
ZEN 853
(weight: 9kg)
 Ø153mm *
 
ZEN 455
(weight: 9.5kg)
 
ZEN 855
(weight: 10kg)
 Ø170mm ZEN 452
(weight: 10.5kg)
 
ZEN 852
(weight: 11kg)
 Ø204mm * ZEN 454
(weight: 12.5kg)
 
ZEN 854
(weight: 13.5kg)

† Weights based on standards specification: “G304 stainless steel satin polished” different material weights may vary.

MATERIALS & FINISHES:

  • Steel - galvanised finish
  • Steel - polyester powder coated finish
  • Stainless steel - G304 bright or satin polished
  • Stainless steel - G316 bright or satin polished

OPTIONS:

INSTALLATION:
Root fixed

  • Foundation depth is usually the same as the root depth of the bollard.
  • Minimum recommended foundation is the root diameter plus 200mm.
  • Concrete mix to 25 newtons

Base Plated

  • Base plates have 4no fixing holes to take M16 bolts (maximum). Fixings not supplied.

Removable

  • Foundation depth 320mm
  • Minimum recommended foundation 450mm sq
  • Dig an additional drainage hole 80mm (d) x 150mm (sq) and fill with pea shingle (directly below socket)
  • Concrete mix to 25 newtons

Security

  • Please note that this product will not perform as an anti ram raid bollard until concrete is fully set and must be protected until this time.

Product Notes

Ø153mm and Ø204mm bollards are available in stainless steel only (not mild steel).

Zenith® Range
Zenith® Sloped Bollard - Registered Furnitubes International Ltd Design.

Design changes
We reserve the right to change the design and specification on any item offered and, where possible, notification will be made.

Back to Products List

  • ZEN451 Zenith Sloped satin polished stainless steel bollards

    ZEN451 Zenith Sloped satin polished stainless steel bollards

  • ZEN451 PPC Zenith Sloped powder coated steel bollard with etched logo

    ZEN451 PPC Zenith Sloped powder coated steel bollard with etched logo

  • ZEN451 PPC Zenith Sloped powder coated steel bollards

    ZEN451 PPC Zenith Sloped powder coated steel bollards

  • ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

    ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

  • ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

    ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

  • ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

    ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

  • ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

    ZEN451 Zenith satin polished stainless steel bollard with etched logo (special commission)

1 of 7

Refer to e-brochure or PDF for full specification details and options.


Address: 3rd Floor, Meridian House, Royal Hill, Greenwich, London SE10 8RD

Telephone: +44 (0)20 8378 3200

Email: sales@furnitubes.com

© Copyright Furnitubes International Ltd, 2010-2016



Your privacy and our use of cookies

We use cookies to ensure that we give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies from this website. Click here for more information.

[x]